Shandong Hongsheng Pressure Vessel Co., LTD

9 litre ISO9809 1.35M3 150bar 37MN Oxygen Tanks Gas Cylinder

1、Minimum order quantity: 100 only

2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

3、We are China's gas cylinder production factory, product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America

4、Cylinder mouth thread processing process: after the thread is processed, it is measured by light gauge and plug gauge. The lower end of the chamfering of the bottle mouth and the base surface of the plug gauge are up to the standard. (Commonly used thread: PZ19.2;  PZ27.8;  PZ39;  25E;  3/4-14 NGT, etc.).  The effective number of thread threads 7~8 buckle, general processing thread buckle number between 10~15 buckle. 

5、This part of ISO 9809 addresses the general requirements on design, construction and initial inspection and testing of pressure receptacles of the United Nations Recommendations on the Transport of Dangerous Goods: Model Regulations.

6、9 litre Gas Cylinder Product

Parameters table (ISO9809-3)

Product Information:

1、9 litre oxygen cylinders; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-3; The outer diameter of the cylinder is 140mm; Oxygen cylinder hydrostatic test pressure is 250bar; Working pressure is 150bar;

2、Oxygen cylinder body height 744mm; Oxygen cylinder weight 10.7kg; Oxygen cylinder mouth thread PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum oxygen tank capacity is 1.35m3 (1350 litres); The minimum design wall thickness of oxygen cylinder is 3.8mm;

3、Aliases: 9 litre gas cylinders; 1.35 m3 Oxygen tanks. 9 litre Oxygen cylinders; 9 litre Oxygen tanks; 9 litre 150bar Oxygen gas tank.

4、Calculation of convex ends (heads and bases) 

7.3.1 The thickness,  at the centre of a convex end shall be not less than that required by the following 

criteria: where the inside knuckle radius, r, is not less than 0,075 D, then: 

To obtain a satisfactory stress distribution in the region where the end joins the shell, any thickening of the 

end that may be required shall be gradual from the point of juncture, particularly at the base. 

For the application of this rule, the point of juncture between the shell and the end is defined by the horizontal lines indicating dimension 

Shape b) shall not be excluded from this requirement.

Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.

• 9 litre gas cylinders
• 1.35m3 Oxygen tanks
• 9 litre Oxygen cylinders
• 9 litre Oxygen tanks
• 9 litre 150bar Oxygen gas tanks