80L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder

  • HS
  • Made in China
  • 15 to 30 days
  • Annual output of more than 800,000 pieces

80L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinder
Do not use forklifts, dump trucks or forklifts to move gas cylinders.

Alias: 80L gas cylinders, 80L bottles, Argon tanks, Mixture cylinders, 80L Oxygen tanks; Fire gas bottles ,80litre Fire cylinders; 80L Nitrogen fire cylinder, Refuge chamber gas bottles, 80 litre carbon dioxide fire tanks,80 litre gas bottles; 80 litre gas cylinder; 80 litre gas tanks

Working pressure 150bar; Hydrostatic test pressure 250bar;80 litres of; TUV; 37 mn; Iso9809-1 production standard; 267mm cylinder outer diameter;

Do not use electromagnetic lifting equipment when lifting gas cylinders.
When lifting bulk gas cylinders with mechanical lifting equipment, the cylinders must be packed into containers, strong cages or baskets and properly secured.

The maximum storage capacity of the 80-litre oxygen cylinder is 12m3 (12,000 litres); The minimum design wall thickness of an 80-litre cylinder is 6.2mm; 80 l cylinder mouth thread PZ27.8; 25E; PZ39; 3/4-14 NGT, etc.;

It is strictly forbidden to use chain rope, wire rope binding or hook flask cap to lift luck bottles, in order to avoid accidents caused by cylinder falling off during lifting;

The product can be filled with oxygen, nitrogen, carbon dioxide, air and other gases 80 litre gas cylinder height 1715mm; 80 litre bottle weight 81KG;

Get a quote? Send Inquiry Now

80L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder


80L cylinders


Factory (we are the manufacturer):Shandong Hongsheng Pressure Vessel Co., LTD

Shandong Hongsheng focus on quality, pay more attention to your safety.

Choose gas cylinders and look for hongsheng quality.

Minimum order quantity: 100 only

In cases where the base is suspected to be plugged, the section shall be etched after the first examination to verify the absence of a plug. Plugged cylinders shall not be approved. 


80L bottles


1、In no case shall the sound thickness (i.e. the thickness with no imperfections) in the base centre be less than the minimum specified thickness 

2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

3、The cylinder shall be regarded as defective if the presence of cracks is detected. It shall also be regarded as defective if the dimensions of any pores or inclusions present reach values considered to pose a threat to safety.

Argon tanks


4、Base check of gas cylinders : A meridian section shall be made in the base centre of the cylinder and one of the surfaces thus obtained polished for examination under a magnification of between × 5 and × 10.

5、Any gas cylinder standard basically consists of the following aspects: scope of application, reference standards, technical terms and symbols, materials, design, manufacturing, inspection, testing, marking, coating, packaging, transportation, storage, etc 

6、Applicable to the company pressure between 8-30mpa, nominal volume between 0.4-80L, used for permanent gas or high pressure liquefied gas cylinder cylinder.  General use of the ambient temperature of -20-60℃, cold areas 


80L cylinders


7、Seamless cylinders early use of carbon steel, (high pressure cylinders use high carbon steel, low pressure cylinders use low carbon steel), the impact resistance of carbon steel materials is generally low, especially in the manganese, carbon ratio is small in steel, gas cylinder rupture accidents are more, from the so-called manufacturing of light cylinders in this sense. At present, manganese steel is used for seamless gas cylinders in China. Japanese manganese steel cylinders also play an important role.

Generally speaking, the general high pressure gas cylinders use manganese steel, Western Europe, the United States and other temperating gas cylinders use chromium molybdenum steel, or chromium nickel molybdenum steel. Our company also produces seamless cylinders of manganese vanadium steel, chromium molybdenum steel and manganese molybdenum steel.


80L cylinders


8、80L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder(ISO9809-3  TUV 150BAR)


Type

Outside

Diameter

(mm)

Water

Capacity

(L)

Bottle

 Height

(mm)

Weight

(kg)

Working 

pressure

(Bar)

Design wall 

thickness

(mm)

Material

Grades

ISO267-80.0L-15026780.01715811506.237MN


Get the latest price? We'll respond as soon as possible(within 12 hours)
  • Required and valid email address
  • This field is required
  • This field is required
  • This field is required
  • This field is required