Shandong Hongsheng Pressure Vessel Co., LTD

50L ISO9809-1 TPED 230bar34CrMo4 Oxygen Tanks Gas Cylinders

Gas cylinder design requirements (ISO9809-1 standard) :

1, bottle body wall thickness :(1)a=D{1-[(10fre-31/2ph)/10FRe]1/2}/2; (2) a or D / 250 + 1; (3) a 1.5 mm or more;

2, bottle bottom structure (concave) :(1)a1≥2a; A2 2 a or higher; R acuity 0.075 D; 0.12 D H p; (2) there should be a transition between concave bottom ring shell and cylinder body; (3) fatigue test;

3. The outer diameter and wall thickness of the neck after forming should be suitable for the torque required by the installation of the valve. When determining the minimum wall thickness, it should be considered that the installation of the valve without the support of accessories such as the collar does not produce permanent deformation

1、Product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America;

We are China's gas cylinder production factory, 

2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

3.Common sense: GB5099, national standard, used for filling permanent gas, high pressure liquefied gas cylinder standard.

4、Minimum order quantity: 100 only

5、The cylinder shall actually experience the maximum and minimum cyclic pressures during the test. The frequency of reversals of pressure shall not exceed 0,25 Hz (15 cycles/min.). The temperature measured on the outside surface of the cylinder shall not exceed 50 °C during the test. 

6、After the test, the cylinder bases shall be sectioned to measure the thickness and to ensure that this thickness is sufficiently close to the minimum thickness prescribed in the design and shall be within the usual production tolerances. In no case shall the actual base thickness exceed the minimum value(s) specified on the drawings by more than 15 %. The test shall be considered satisfactory if the cylinder attains the required number of cycles without developing a leak.

7、 (ISO9809-1  230bar) 50 litre Gas Cylinder Product Parameters table

34CrMo4  50L ISO9809-1 TPED 230bar  Oxygen Tanks Gas Cylinders

• 50L 230bar gas cylinders
• 50L 230bar Oxygen tanks
• 50L 230bar Oxygen cylinders
• TPED 230bar gas cylinders
• 230bar gas cylinders